SC801 intumescent paint for steel can provide UP TO 120 minutes of fire protection on INTERNAL steel only.
As with all intumescent paint for steel, it comes in a matt white finish, although compatible topcoats may be applied to achieve a tinted finish.
Application Conditions:
This paint should only be applied when both the air and steel temperature is greater than 5°C.
Relative humidity should be lower than 80% for successful application.
Steel surface temperature should be at least 3°C above the dew point.
The steel must be dry and free from contact with rain or condensation during the application and drying process.
Application Instructions:
We recommend application by airless spray.
Prior to use, the paint must be stirred thoroughly and not thinned.
Spraying instructions:
Operating pressure: 2500-3000psi (175-210 kg/cm²)
Tip size: 19-21 thou
Fan angle: 20°-40°
Hose diameter: 10mm (3/8″ ) (internal diameter)
Hose length: Max. 60 metres, in-line
IMPORTANT INFORMATION ON PURCHASING OF PASSIVE FIRE PROTECTION PRODUCTS NOTICE:
The information displayed about the products on this website is to be used for guidance ONLY, we advise that all customer contact our technical department to obtain a free no obligation specification and quotation before purchasing goods directly from the website.
Products purchased directly from our website without specification will NOT qualify for certification.
Please be aware that any negligence caused by failure to obtain the relevant advice, or availment of our specification and estimation service, will absolve International Passive Fire Ltd from any liability should Passive Fire Protection Products prepared, or used, by the purchaser, or any other parties, result in damage to property or human life, or for any monetary costs incurred due to incorrect usage.
[Product-Page-Call-To-Action]